Kyle2022

Forum Replies Created

Viewing 25 posts - 1 through 25 (of 27 total)
  • Author
    Posts
  • in reply to: 11th Hour Brewing – Meet the LUG Event & More #64041
    Kyle2022
    Participant

      Unfortanely, Caleigh and I will not be able to attend this Wednesday. Caleigh was involved in a head on collision this past weekend. Before anyone asks, she is fine, made it out with only some bruises and a really bad sprained wrist. Some impatient person crossed the yellow line into her lane to circumvent another vehicle that was stopped on the road trying to make a left-hand turn.

      in reply to: 11th Hour Brewing – Meet the LUG Event & More #63612
      Kyle2022
      Participant

        Caleigh and I talked about we will be coming for meet the Lug event.

        in reply to: Ambassador Committee | Are You Interested? #63346
        Kyle2022
        Participant

          @watchwmarcella is this open to everyone to see or just a select few? and do you want a voice channel as well or just a text channel?

          in reply to: 2024 Penn Hills Library Summer Reading Program #60324
          Kyle2022
          Participant

            I will be there around 11 then I will be picking my stuff along with Dan’s telescope

            in reply to: LUG Convention Tokens #60258
            Kyle2022
            Participant

              I personally think these are a bad idea because those “tokens” I call them personal trophies where an idivual like what I have built and displayed these are supposed to be anonymous. I know for those who have shown at Brickfair or Convention do sometimes get them. Putting the Lug logo and setting them next to a build could be seen as advertising or that person is part of the Lug that really is not another issue I can see is if “that person got one why didn’t I and my build is better” type situation. That is these are better to be given anonymously. Another situation is who gets to decide who would get one or not, is there going to be pictures taken and posted so we as group get to vote. Or is it who just went to display. I feel that this would be unfair to those who are a part of the Lug that did not attend and would like a say in that.
              With these I do believe anonymity is better and should be done individually because everyone might have a difference of opinion on someone else’s build.

              in reply to: 2024 Penn Hills Library Summer Reading Program #60217
              Kyle2022
              Participant

                what time is the teardown on the 30th?

                in reply to: discord integration with wordpress #59284
                Kyle2022
                Participant

                  I would imagine that it would work both ways

                  in reply to: discord integration with wordpress #59282
                  Kyle2022
                  Participant

                    From taking a Look at the List I would suggest the
                    WP Discord Invite plugin:
                    -This sounds like your typical invite plugin
                    The other one is Argus:
                    the reason I would suggest this is of all the
                    features available:
                    -Restrict profiles without member
                    verification.
                    -Blocks discord accounts that are not
                    verified.
                    -Synchronize both the guild roles in
                    Discord and the user roles in WordPress.
                    -Integrated with MemberPress and Ultimate
                    Member.
                    -Show pinned messages, chats from your
                    channel, and guild rules.

                    in reply to: Q2 Meeting – Penn Hills Library #59169
                    Kyle2022
                    Participant

                      Learn from a Lug Member? is there still talks about making this a one day event?

                      in reply to: 2024 Penn Hills Library Summer Reading Program #59054
                      Kyle2022
                      Participant

                        Thank you @randomdan that helps. I will still bring The Artemis set to see if we can fit it. If not, no big deal. I also have some smaller and flatter builds that I am going to bring.

                        in reply to: 2024 Penn Hills Library Summer Reading Program #58936
                        Kyle2022
                        Participant

                          I read space theme!!!! I need dimensions for how tall my builds can be I also got the new Artemis set that I can bring for the install and several other Rockets if there isn’t much of a height restriction

                          in reply to: The Adventures of… #56991
                          Kyle2022
                          Participant

                            I was unaware that this was brought up at a meeting. This was the second part I was asking about quantity. @bengood921 hit the nail on the head. Copyright is a pain I was going to recommend a shirt or hoodie with minifig outlined with the Logo in the center. But I remember having a conversation about this with Joe Meno (Brick Journal) when I met him at Brickfair in 2021 and Todd was not allowed to even sell something like that.

                            in reply to: The Adventures of… #56974
                            Kyle2022
                            Participant

                              that is easy enough I have the lug logo already in a png. Also how many are you looking to get done? that would change my recommendations on what to do. If we are talking one maybe 2 then I would recommend using a clear sticker paper for a vinyl and a laser printer (less expensive) so the bleed will not be a big deal. If you are looking to more than say 20 then I would recommend to look at millionprints to have it uv printed on the part (more expensive)

                              in reply to: 2024 Community Event – Penn Hills Library #56918
                              Kyle2022
                              Participant

                                I would be up to do stickers again for that. I would need some equipment for it and that would depend on when? I could also do a class on Brick Cleaning and Maintenance which I am current working on for a live stream this weekend.

                                in reply to: BrickUniverse Harrisburg Oct 07-08, 2023 #53083
                                Kyle2022
                                Participant

                                  Kevin is correct about this I am hoping to find group members that can commit and be present with their builds again I know will be more difficult because of the added hotel cost with this trip vs stay home and drive to the event which is more convenient for most.

                                  For the set up I am planning and currently working on I personally will not have any extra space to take others builds.

                                  I did do some price gathering for Hotel on Priceline.com as of right now you can get hotels booked for as cheap as $46-$80 a night within the Harrisburg area and that are at least 15-20 min away from the Carlisle Expo Center which this is being held.

                                  in reply to: BrickUniverse Harrisburg Oct 07-08, 2023 #53070
                                  Kyle2022
                                  Participant

                                    Awesome thank you

                                    in reply to: Discord Build nights 2023 #52683
                                    Kyle2022
                                    Participant

                                      I am interested in that but you have to make a Lego snow angle if you do lol

                                      in reply to: SCL YouTube Channel!!! #51929
                                      Kyle2022
                                      Participant

                                        I have an idea for an Intro I can talk about it on discord tonight

                                        in reply to: SCL YouTube Channel!!! #51872
                                        Kyle2022
                                        Participant

                                          Stud.io tutorials, tips and tricks, live build and chill nights with lug members

                                          in reply to: Science Center Displays 2023 #50059
                                          Kyle2022
                                          Participant

                                            Awesome sound great, hope to hear from you soon on this. I cannot wait to see you and everyone this weekend it is going to be epic

                                            in reply to: Science Center Displays 2023 #50038
                                            Kyle2022
                                            Participant

                                              I came up with a rocket display Based on Bob Grier’s dimensions. not exactly pittsburgh themed I would have to wait till after the Ross Park Mall to build the base

                                              Attachments:
                                              You must be logged in to view attached files.
                                              in reply to: Looking for a way to contact Kyle #47943
                                              Kyle2022
                                              Participant

                                                LOL I am a wanted man

                                                in reply to: SLS Block1b Artemis IV #47840
                                                Kyle2022
                                                Participant

                                                  WTAE segment Monroeville Brickfest its at the end

                                                  in reply to: SLS Block1b Artemis IV #47838
                                                  Kyle2022
                                                  Participant

                                                    Here it is at BrickFair Exton Pa

                                                    Attachments:
                                                    You must be logged in to view attached files.
                                                    in reply to: SLS Block1b Artemis IV #44537
                                                    Kyle2022
                                                    Participant

                                                      officially no nasa has not chosen one as of yet. I did design create one based off the Space X Dragon XL Capsule it does fit inside

                                                      Attachments:
                                                      You must be logged in to view attached files.
                                                    Viewing 25 posts - 1 through 25 (of 27 total)

                                                    Online Now

                                                    No members are currently shown as online.